$ 1,994.00

DD MK12

Daniel Defense

$ 1,994.00
Regular price $ 1,994.00

The evolution of the SPR comes home to Daniel Defense in the MK12. Born of necessity, raised in the Army’s Marksmanship Unit and refined to Daniel Defense Mil-Spec+ standards, it is now available.

The MK12 is constructed around an 18-inch Stainless Steel barrel with a chamber created during the Cold Hammer Forging process, which ensures the most precise alignment of the chamber to the bore possible. This, along with being DLC finished, equates to unprecedented accuracy and durability. The MK12 barrel is engineered with a rifle-length direct impingement gas system and utilizes the MK12 gas block, which is built to Crane Specifications for USSOCOM. The MK12 gas block is precision CNC machined from 416 stainless steel and Black Oxide Coated. The rifle is fed with a M16 profile bolt carrier group and uses a Vltor Mod 4 charging handle for ease of operation. The upper receiver is equipped with a free floating DDM4 Rail 12.0 quad rail for allowing your choice of optics and accessories and is finished off with a Daniel Defense Improved Flash Suppressor.

The MK12 was designed from the ground up to be a precision rifle, therefore it required certain refinements. We equipped it with the Geissele SSA 2-Stage Trigger to give the marksman an advantage delivering precise fire to the target. We also furnished the MK12 with the rugged and comfortable Daniel Defense Buttstock and Pistol Grip.

NOTE: Firearms purchased on this website must be picked up in person (GA residents only) or shipped to a Federal Firearms License (FFL) holder in your state of residence. You must provide us with a copy of the FFL prior to shipment. Transfer fees charged by the receiving FFL are your responsibility. If you are not eligible to own a firearm, return shipping and other charges will be deducted from your refund.

Firearms on this website are being offered and sold on behalf of Telluric Arms, LLC.

MATERIALS & CONSTRUCTION

  • LOWER RECEIVER: Mil-Spec with Enhanced Flared Magazine Well and Rear Receiver QD Swivel Attachment Point. CNC Machined of 7075-T6 Aluminum, Type III Hard Coat Anodized
  • UPPER RECEIVER: Mil-Spec with Indexing Marks and M4 Feed Ramps. CNC Machined of 7075-T6 Aluminum, Type III Hard Coat Anodized
  • BARREL: Proprietary Blend of Stainless Steel, Cold Hammer Forged, 1:7” Twist, 18" MK12 Profile, DLC Finished, and HP/MPI tested
  • GAS SYSTEM: MK12 Low Profile Gas Block CNC Machined of hardened 416 stainless steel with Black Oxide Coating, Rifle-Length, Direct Impingement
  • MUZZLE DEVICE: Daniel Defense Flash Suppressor, 17-4 PH Stainless Steel, Salt Bath Nitride Finished
  • BOLT CARRIER GROUP: M16 Profile, Mil-Spec MP Tested, Chrome Lined, Properly Staked Gas Key
  • BUFFER: H Buffer
  • SIGHTS: Sold Separately
  • HANDGUARD: Daniel Defense DDM4 Rail 12.0, CNC Machined of 6061-T6 Aluminum, Type III Hard Coat Anodized
  • RECEIVER EXTENSION: 6 Position Mil-Spec 7075-T6 Aluminum
  • BUTTSTOCK: Daniel Defense Buttstock, Glass Filled Polymer with Soft Touch Overmolding
  • PISTOL GRIP: Daniel Defense Pistol Grip, Glass Filled Polymer with Soft Touch Overmolding
  • RAIL PANELS: Daniel Defense Rail Panels made from Santoprene, heat resistant to 300° F.
  • Made in the USA!

SPECS:

Caliber 5.56mm NATO
Muzzle Thread 1/2×28 TPI
Gas System Rifle
Barrel Length 18"
Profile MK12
Product Weight 7.41 lbs
Length 34 3/4” – 37 7/8”
Magazine DD Magazine (32 Round)
Case Daniel Defense Full-Latch Impact Plastic Case

All Daniel Defense products carry a 100% satisfaction guarantee against defects in original materials and workmanship. If your Daniel Defense product shows evidence of such defects, Daniel Defense will make every accommodation to fix, repair, or replace your product in the most expeditious manner possible. Daniel Defense does not warranty products or damage caused to our products by the correct or incorrect installation of other manufacturer’s products. Be sure to retain your sales slip as proof of purchase date when making a claim.

The evolution of the SPR comes home to Daniel Defense in the MK12. Born of necessity, raised in the Army’s Marksmanship Unit and refined to Daniel Defense Mil-Spec+ standards, it is now available.

The MK12 is constructed around an 18-inch Stainless Steel barrel with a chamber created during the Cold Hammer Forging process, which ensures the most precise alignment of the chamber to the bore possible. This, along with being DLC finished, equates to unprecedented accuracy and durability. The MK12 barrel is engineered with a rifle-length direct impingement gas system and utilizes the MK12 gas block, which is built to Crane Specifications for USSOCOM. The MK12 gas block is precision CNC machined from 416 stainless steel and Black Oxide Coated. The rifle is fed with a M16 profile bolt carrier group and uses a Vltor Mod 4 charging handle for ease of operation. The upper receiver is equipped with a free floating DDM4 Rail 12.0 quad rail for allowing your choice of optics and accessories and is finished off with a Daniel Defense Improved Flash Suppressor.

The MK12 was designed from the ground up to be a precision rifle, therefore it required certain refinements. We equipped it with the Geissele SSA 2-Stage Trigger to give the marksman an advantage delivering precise fire to the target. We also furnished the MK12 with the rugged and comfortable Daniel Defense Buttstock and Pistol Grip.

NOTE: Firearms purchased on this website must be picked up in person (GA residents only) or shipped to a Federal Firearms License (FFL) holder in your state of residence. You must provide us with a copy of the FFL prior to shipment. Transfer fees charged by the receiving FFL are your responsibility. If you are not eligible to own a firearm, return shipping and other charges will be deducted from your refund.

Firearms on this website are being offered and sold on behalf of Telluric Arms, LLC.

MATERIALS & CONSTRUCTION

  • LOWER RECEIVER: Mil-Spec with Enhanced Flared Magazine Well and Rear Receiver QD Swivel Attachment Point. CNC Machined of 7075-T6 Aluminum, Type III Hard Coat Anodized
  • UPPER RECEIVER: Mil-Spec with Indexing Marks and M4 Feed Ramps. CNC Machined of 7075-T6 Aluminum, Type III Hard Coat Anodized
  • BARREL: Proprietary Blend of Stainless Steel, Cold Hammer Forged, 1:7” Twist, 18" MK12 Profile, DLC Finished, and HP/MPI tested
  • GAS SYSTEM: MK12 Low Profile Gas Block CNC Machined of hardened 416 stainless steel with Black Oxide Coating, Rifle-Length, Direct Impingement
  • MUZZLE DEVICE: Daniel Defense Flash Suppressor, 17-4 PH Stainless Steel, Salt Bath Nitride Finished
  • BOLT CARRIER GROUP: M16 Profile, Mil-Spec MP Tested, Chrome Lined, Properly Staked Gas Key
  • BUFFER: H Buffer
  • SIGHTS: Sold Separately
  • HANDGUARD: Daniel Defense DDM4 Rail 12.0, CNC Machined of 6061-T6 Aluminum, Type III Hard Coat Anodized
  • RECEIVER EXTENSION: 6 Position Mil-Spec 7075-T6 Aluminum
  • BUTTSTOCK: Daniel Defense Buttstock, Glass Filled Polymer with Soft Touch Overmolding
  • PISTOL GRIP: Daniel Defense Pistol Grip, Glass Filled Polymer with Soft Touch Overmolding
  • RAIL PANELS: Daniel Defense Rail Panels made from Santoprene, heat resistant to 300° F.
  • Made in the USA!

SPECS:

Caliber 5.56mm NATO
Muzzle Thread 1/2×28 TPI
Gas System Rifle
Barrel Length 18"
Profile MK12
Product Weight 7.41 lbs
Length 34 3/4” – 37 7/8”
Magazine DD Magazine (32 Round)
Case Daniel Defense Full-Latch Impact Plastic Case

All Daniel Defense products carry a 100% satisfaction guarantee against defects in original materials and workmanship. If your Daniel Defense product shows evidence of such defects, Daniel Defense will make every accommodation to fix, repair, or replace your product in the most expeditious manner possible. Daniel Defense does not warranty products or damage caused to our products by the correct or incorrect installation of other manufacturer’s products. Be sure to retain your sales slip as proof of purchase date when making a claim.