$ 1,974.00

DDM4A1

Daniel Defense

$ 1,974.00
Regular price $ 1,974.00

The Daniel Defense M4A1 features the M4A1 RIS II, which has been in use by US Special Operations Command (SOCOM) for the SOPMOD II Weapons System since 2005. The M4A1 features a 14.5” Cold Hammer Forged M4 Profile barrel with a permanently attached Daniel Defense Flash Suppressor. The M4A1 is one of many configurations that is finished with our Mil Spec + Cerakote. This rifle also comes with the rugged and comfortable Daniel Defense Buttstock and Pistol Grip.

NOTE: Firearms purchased on this website must be picked up in person (GA residents only) or shipped to a Federal Firearms License (FFL) holder in your state of residence. You must provide us with a copy of the FFL prior to shipment. Transfer fees charged by the receiving FFL are your responsibility. If you are not eligible to own a firearm, return shipping and other charges will be deducted from your refund.

Firearms on this website are being offered and sold on behalf of Telluric Arms, LLC.

MATERIALS & CONSTRUCTION

  • LOWER RECEIVER: Mil-Spec with Enhanced Flared Magazine Well and Rear Receiver QD Swivel Attachment Point. CNC Machined of 7075-T6 Aluminum, Type III Hard Coat Anodized
  • UPPER RECEIVER: Mil-Spec with Indexing Marks and M4 Feed Ramps. CNC Machined of 7075-T6 Aluminum, Type III Hard Coat Anodized
  • BARREL: Chrome Moly Vanadium Steel, Cold Hammer Forged, 1:7 Twist, 14.5? M4 Profile, Chrome Lined, Mil-Spec Heavy Phosphate Coated, and HP/MPI Tested
  • GAS SYSTEM: Pinned Low Profile Gas Block CNC Machined of 4140 hardened steel with Mil-Spec Heavy Phosphate Coating, Carbine Length, Direct Impingement
  • MUZZLE DEVICE: Pinned and Welded Daniel Defense Flash Suppressor, Extended, 17-4 PH Stainless Steel, Salt Bath Nitride Finished
  • BOLT CARRIER GROUP: M16 Profile, Mil-Spec MP Tested, Chrome Lined, Properly Staked Gas Key
  • BUFFER: H Buffer
  • SIGHTS: Sold Separately
  • HANDGUARD: Daniel Defense M4A1 Rail Interface System (RIS) II, CNC Machined of 6061-T6 Aluminum
  • RECEIVER EXTENSION: 6 Position Mil-Spec 7075-T6 Aluminum
  • BUTTSTOCK: Daniel Defense Buttstock, Glass Filled Polymer with Soft Touch Overmolding
  • PISTOL GRIP: Daniel Defense Pistol Grip, Glass Filled Polymer with Soft Touch Overmolding
  • RAIL PANELS: Daniel Defense Rail Panels made from Santoprene, heat resistant to 300° F.
  • Made in the USA!

SPECS:

Caliber 5.56mm NATO
Muzzle Thread 1/2×28 TPI
Gas System Carbine
Barrel Length 14.5"
Profile M4
Product Weight 6.74 lbs
Length 31 1/2” – 34 3/4”
Magazine DD Magazine
Case Daniel Defense Full-Latch Impact Plastic Case

All Daniel Defense products carry a 100% satisfaction guarantee against defects in original materials and workmanship. If your Daniel Defense product shows evidence of such defects, Daniel Defense will make every accommodation to fix, repair, or replace your product in the most expeditious manner possible. Daniel Defense does not warranty products or damage caused to our products by the correct or incorrect installation of other manufacturer’s products. Be sure to retain your sales slip as proof of purchase date when making a claim.

The Daniel Defense M4A1 features the M4A1 RIS II, which has been in use by US Special Operations Command (SOCOM) for the SOPMOD II Weapons System since 2005. The M4A1 features a 14.5” Cold Hammer Forged M4 Profile barrel with a permanently attached Daniel Defense Flash Suppressor. The M4A1 is one of many configurations that is finished with our Mil Spec + Cerakote. This rifle also comes with the rugged and comfortable Daniel Defense Buttstock and Pistol Grip.

NOTE: Firearms purchased on this website must be picked up in person (GA residents only) or shipped to a Federal Firearms License (FFL) holder in your state of residence. You must provide us with a copy of the FFL prior to shipment. Transfer fees charged by the receiving FFL are your responsibility. If you are not eligible to own a firearm, return shipping and other charges will be deducted from your refund.

Firearms on this website are being offered and sold on behalf of Telluric Arms, LLC.

MATERIALS & CONSTRUCTION

  • LOWER RECEIVER: Mil-Spec with Enhanced Flared Magazine Well and Rear Receiver QD Swivel Attachment Point. CNC Machined of 7075-T6 Aluminum, Type III Hard Coat Anodized
  • UPPER RECEIVER: Mil-Spec with Indexing Marks and M4 Feed Ramps. CNC Machined of 7075-T6 Aluminum, Type III Hard Coat Anodized
  • BARREL: Chrome Moly Vanadium Steel, Cold Hammer Forged, 1:7 Twist, 14.5? M4 Profile, Chrome Lined, Mil-Spec Heavy Phosphate Coated, and HP/MPI Tested
  • GAS SYSTEM: Pinned Low Profile Gas Block CNC Machined of 4140 hardened steel with Mil-Spec Heavy Phosphate Coating, Carbine Length, Direct Impingement
  • MUZZLE DEVICE: Pinned and Welded Daniel Defense Flash Suppressor, Extended, 17-4 PH Stainless Steel, Salt Bath Nitride Finished
  • BOLT CARRIER GROUP: M16 Profile, Mil-Spec MP Tested, Chrome Lined, Properly Staked Gas Key
  • BUFFER: H Buffer
  • SIGHTS: Sold Separately
  • HANDGUARD: Daniel Defense M4A1 Rail Interface System (RIS) II, CNC Machined of 6061-T6 Aluminum
  • RECEIVER EXTENSION: 6 Position Mil-Spec 7075-T6 Aluminum
  • BUTTSTOCK: Daniel Defense Buttstock, Glass Filled Polymer with Soft Touch Overmolding
  • PISTOL GRIP: Daniel Defense Pistol Grip, Glass Filled Polymer with Soft Touch Overmolding
  • RAIL PANELS: Daniel Defense Rail Panels made from Santoprene, heat resistant to 300° F.
  • Made in the USA!

SPECS:

Caliber 5.56mm NATO
Muzzle Thread 1/2×28 TPI
Gas System Carbine
Barrel Length 14.5"
Profile M4
Product Weight 6.74 lbs
Length 31 1/2” – 34 3/4”
Magazine DD Magazine
Case Daniel Defense Full-Latch Impact Plastic Case

All Daniel Defense products carry a 100% satisfaction guarantee against defects in original materials and workmanship. If your Daniel Defense product shows evidence of such defects, Daniel Defense will make every accommodation to fix, repair, or replace your product in the most expeditious manner possible. Daniel Defense does not warranty products or damage caused to our products by the correct or incorrect installation of other manufacturer’s products. Be sure to retain your sales slip as proof of purchase date when making a claim.