$ 1,664.00

DDM4V7 SLW

Daniel Defense

$ 1,664.00
Regular price $ 1,664.00

The Daniel Defense M4 V7 SLW is one of the lightest, fastest-handling rifles available in the DDM4 line-up, tipping the scales at under 6 lbs. Built around a Cold Hammer Forged, 14.5” Lightweight profile barrel, the V7 SLW has an Extended Flash Suppressor which is pinned and welded to reach the NFA required 16” minimum barrel length. The mid-length gas system provides smooth and reliable cycling under any conditions and reduces both perceived recoil and wear on moving parts. A free-floating MFR XS 13.5 handguard offers incredible weight savings as well as superior cooling, ergonomics, and modularity while maintaining the strength and durability expected from Daniel Defense. With the M-LOK attachment points that run along 7 positions and an uninterrupted 1913 Picatinny rail on top, the V7 SLW has plenty of room for the sights, optics, and accessories the operator may require. The rifle is finished off with the rugged and comfortable Daniel Defense Buttstock and Pistol grip.

NOTE: Firearms purchased on this website must be picked up in person (GA residents only) or shipped to a Federal Firearms License (FFL) holder in your state of residence. You must provide us with a copy of the FFL prior to shipment. Transfer fees charged by the receiving FFL are your responsibility. If you are not eligible to own a firearm, return shipping and other charges will be deducted from your refund.

Firearms on this website are being offered and sold on behalf of Telluric Arms, LLC.

MATERIALS & CONSTRUCTION

  • LOWER RECEIVER: Mil-Spec with Enhanced Flared Magazine Well and Rear Receiver QD Swivel Attachment Point. CNC Machined of 7075-T6 Aluminum
  • UPPER RECEIVER: Mil-Spec with Indexing Marks and M4 Feed Ramps. CNC Machined of 7075-T6 Aluminum
  • BARREL: Chrome Moly Vanadium Steel, Cold Hammer Forged, 1:7" Twist, 14.5" Lightweight Profile, Chrome Lined, Mil-Spec Heavy Phosphate Coated, and HP/MPI Tested
  • GAS SYSTEM: Pinned Low Profile Gas Block CNC Machined of 4140 hardened steel and Mil-Spec Heavy Phosphate Coating, Mid-length, Direct Impingement
  • MUZZLE DEVICE: Pinned and Welded Daniel Defense Flash Suppressor, Extended, 17-4 PH Stainless Steel, Salt Bath Nitride Finished
  • BOLT CARRIER GROUP: M16 Profile, Mil-Spec MP tested, Chrome Lined, Properly Staked Gas Key
  • BUFFER: H Buffer
  • SIGHTS: Sold Separately
  • HANDGUARD: Daniel Defense MFR 13.5", CNC Machined of 6061-T6 Aluminum, M-LOK Attachment, Type III Hard Coat Anodized
  • RECEIVER EXTENSION: 6-Position Mil-Spec 7075-T6 Aluminum
  • BUTTSTOCK: Daniel Defense Buttstock, Glass Filled Polymer with Soft Touch Overmolding
  • PISTOL GRIP: Daniel Defense Pistol Grip, Glass Filled Polymer with Soft Touch Overmolding
  • Made in the USA!

SPECS:

Caliber 5.56mm NATO
Muzzle Thread 1/2×28 TPI
Gas System Mid-length
Barrel Length 14.5"
Profile Lightweight
Product Weight 5.90 lb.
Length 31 1/2” – 34 3/4”
Magazine DD Magazine
Case Daniel Defense Full-Latch Impact Plastic Case

All Daniel Defense products carry a 100% satisfaction guarantee against defects in original materials and workmanship. If your Daniel Defense product shows evidence of such defects, Daniel Defense will make every accommodation to fix, repair, or replace your product in the most expeditious manner possible. Daniel Defense does not warranty products or damage caused to our products by the correct or incorrect installation of other manufacturer’s products. Be sure to retain your sales slip as proof of purchase date when making a claim.

The Daniel Defense M4 V7 SLW is one of the lightest, fastest-handling rifles available in the DDM4 line-up, tipping the scales at under 6 lbs. Built around a Cold Hammer Forged, 14.5” Lightweight profile barrel, the V7 SLW has an Extended Flash Suppressor which is pinned and welded to reach the NFA required 16” minimum barrel length. The mid-length gas system provides smooth and reliable cycling under any conditions and reduces both perceived recoil and wear on moving parts. A free-floating MFR XS 13.5 handguard offers incredible weight savings as well as superior cooling, ergonomics, and modularity while maintaining the strength and durability expected from Daniel Defense. With the M-LOK attachment points that run along 7 positions and an uninterrupted 1913 Picatinny rail on top, the V7 SLW has plenty of room for the sights, optics, and accessories the operator may require. The rifle is finished off with the rugged and comfortable Daniel Defense Buttstock and Pistol grip.

NOTE: Firearms purchased on this website must be picked up in person (GA residents only) or shipped to a Federal Firearms License (FFL) holder in your state of residence. You must provide us with a copy of the FFL prior to shipment. Transfer fees charged by the receiving FFL are your responsibility. If you are not eligible to own a firearm, return shipping and other charges will be deducted from your refund.

Firearms on this website are being offered and sold on behalf of Telluric Arms, LLC.

MATERIALS & CONSTRUCTION

  • LOWER RECEIVER: Mil-Spec with Enhanced Flared Magazine Well and Rear Receiver QD Swivel Attachment Point. CNC Machined of 7075-T6 Aluminum
  • UPPER RECEIVER: Mil-Spec with Indexing Marks and M4 Feed Ramps. CNC Machined of 7075-T6 Aluminum
  • BARREL: Chrome Moly Vanadium Steel, Cold Hammer Forged, 1:7" Twist, 14.5" Lightweight Profile, Chrome Lined, Mil-Spec Heavy Phosphate Coated, and HP/MPI Tested
  • GAS SYSTEM: Pinned Low Profile Gas Block CNC Machined of 4140 hardened steel and Mil-Spec Heavy Phosphate Coating, Mid-length, Direct Impingement
  • MUZZLE DEVICE: Pinned and Welded Daniel Defense Flash Suppressor, Extended, 17-4 PH Stainless Steel, Salt Bath Nitride Finished
  • BOLT CARRIER GROUP: M16 Profile, Mil-Spec MP tested, Chrome Lined, Properly Staked Gas Key
  • BUFFER: H Buffer
  • SIGHTS: Sold Separately
  • HANDGUARD: Daniel Defense MFR 13.5", CNC Machined of 6061-T6 Aluminum, M-LOK Attachment, Type III Hard Coat Anodized
  • RECEIVER EXTENSION: 6-Position Mil-Spec 7075-T6 Aluminum
  • BUTTSTOCK: Daniel Defense Buttstock, Glass Filled Polymer with Soft Touch Overmolding
  • PISTOL GRIP: Daniel Defense Pistol Grip, Glass Filled Polymer with Soft Touch Overmolding
  • Made in the USA!

SPECS:

Caliber 5.56mm NATO
Muzzle Thread 1/2×28 TPI
Gas System Mid-length
Barrel Length 14.5"
Profile Lightweight
Product Weight 5.90 lb.
Length 31 1/2” – 34 3/4”
Magazine DD Magazine
Case Daniel Defense Full-Latch Impact Plastic Case

All Daniel Defense products carry a 100% satisfaction guarantee against defects in original materials and workmanship. If your Daniel Defense product shows evidence of such defects, Daniel Defense will make every accommodation to fix, repair, or replace your product in the most expeditious manner possible. Daniel Defense does not warranty products or damage caused to our products by the correct or incorrect installation of other manufacturer’s products. Be sure to retain your sales slip as proof of purchase date when making a claim.